| Applicable Motors | Manufactured by Mitsubishi Electric System & Service Co., Ltd. | Mitsubishi Electric Corporation | ||
|---|---|---|---|---|
| Model※1 | Cable Length | Model※1 | Cable Length | |
| HF-KN，HG-KR，HG-MR | SC-J3ENCBL□M-■-L※5 | 1～10m | MR-J3ENCBL□M-■-L | 2・5・10m |
| HF-KN※2，HG-KR※2，HG-MR※2（Motor Side） | SC-J3JCBL□M-■-L※4,※5 | 1～5m | MR-J3JCBL03M-■-L | 0.3m |
| HF-KN※2，HG-KR※2，HG-MR※2（Amplifier Side） | SC-EKCBL□M-L※3,※4,※5 | 1～50m | MR-EKCBL□M-L | 20・30m |
| HF-KN※2，HG-KR※2，HG-MR※2（Motor Side） | SC-J3JSCBL□M-■-L※4,※5 | 1～5m | MR-J3JSCBL03M-L | 0.3m |
| HF-KN※2，HG-KR※2， HG-MR※2 HG-SR，HG-JR53(4)，73(4)，103(4)，153(4)，203(4)，353(4)，503(4)，HG-RR，HG-UR |
SC-J3ENSCBL□M-L※4,※5 | 1～50m | MR-J3ENSCBL□M-L | 2・5・10・ 20・30m |
- ※1.
- The cable length should replace the □ in the model name.
The ■ in the model name should be either "A1" or "A2". "A1" - Motor load side pull-out. "A2" - Motor opposite-load side pull-out. - ※2.
- Please use with relay connection. Refer to Encoder Cable Relay Connection Assembly Table for details.
- ※3.
- Cables 30 m or longer will be 4-wire types. Servo amplifier parameters must be configured if using these cables.
Refer to the Servo Amplifier Technical Documents by Mitsubishi Electric Corporation for details. - ※4.
- Please refer to the Encoder Cable Relay Connection Assembly Table for the cable length when using the relay connection.
- ※5.
- The connector used may differ from the connector set of the cable manufactured by Mitsubishi Electric Corporation. Please check the specifications for details.
