Applicable Motors | Manufactured by Mitsubishi Electric System & Service Co., Ltd. | Mitsubishi Electric Corporation | ||
---|---|---|---|---|
Model※1 | Cable Length | Model※1 | Cable Length | |
HF-KN,HG-KR,HG-MR | SC-J3ENCBL□M-■-H※5 | 1~10m | MR-J3ENCBL□M-■-H | 2・5・10m |
HF-KN※2,HG-KR※2, HG-MR※2(Motor Side) |
SC-J3JCBL□M-■-H※4,※5 | 1~5m | ― | ― |
HF-KN※2,HG-KR※2, HG-MR※2(Amplifier Side) |
SC-EKCBL□M-H※3,※4,※5 | 1~50m | MR-EKCBL□M-H | 20・30・ 40・50m |
HF-KN※2,HG-KR※2, HG-MR※2(Motor Side) |
SC-J3JSCBL□M-■-H※4,※5 | 1~5m | ― | ― |
HF-KN※2,HG-KR※2,HG-MR※2,HG-SR, HG-JR53(4),73(4),103(4),153(4),203(4),353(4),503(4),HG-RR,HG-UR |
SC-J3ENSCBL□M-H※4,※5 | 1~50m | MR-J3ENSCBL□M-H | 2・5・10・20・ 30・40・50m |
HG-JR601(4),801(4),12K1(4),15K1(4), 20K1(4),25K1(4),30K1(4),37K1(4), 701M(4),11K1M(4),15K1M(4), 22K1M(4),30K1M(4),37K1M(4), 45K1M4,55K1M4 |
SC-ENECBL□M-H-MTH※5 | 1~50m | MR-ENECBL□M-H-MTH | 2・5・10・20・ 30・40・50m |
- ※1.
- The cable length should replace the □ in the model name.
The ■ in the model name should be either "A1" or "A2". "A1" - Motor load side pull-out. "A2" - Motor opposite-load side pull-out. - ※2.
- Please use with relay connection. Refer to Encoder Cable Relay Connection Assembly Table for details.
- ※3.
- Cables 30 m or longer will be 4-wire types. Servo amplifier parameters must be configured if using these cables.
Refer to the Servo Amplifier Technical Documents by Mitsubishi Electric Corporation for details. - ※4.
- Please refer to the Encoder Cable Relay Connection Assembly Table for the cable length when using the relay connection.
- ※5.
- The connector used may differ from the connector set of the cable manufactured by Mitsubishi Electric Corporation. Please check the specifications for details.